 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Figure 6. Connections between the two IC's. Figure 7. Board after wires are connected. Now just reassemble everything and you are done. Just put 5V and Gnd on the red and black wires, then either pull the white wire high to go one direction, or pull the other wire high to go the other direction. Do not pull them both high at the same time. Figure 8. Completed servo. Here is a simple circuit you can use to drive the wires using 1 PWM signal and 1 Direction signal. 1. www..com |
Price & Availability of BAL6688L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |